Pairing

Using Bluetooth®

  • Make sure that your source device's Bluetooth is switched on.
  • Make sure that the headphone is turned OFF (if you tap the power button, the LED shouldn't light up).
  • Hold the power button until the LED indicator flashes red-white-red-white etc.
  • In your phone's Bluetooth settings, tap 'MA650 Wireless' / 'MA750 Wireless' / 'MA390 Wireless' to connect your headphone.

Using NFC

  • Make sure that your device's Bluetooth and NFC functions are switched on.
  • Make sure that the headphone is turned ON (if you tap the power button, the LED should light, indicating battery level).
  • Hold the NFC mark on the left capsule to the devices NFC hub (typically near the reverse camera, in the centre).
  • Confirm the source device's prompts to pair the headphone.

Charging

RHA Bluetooth headphones can be charged using any compatible USB C cable. Please note that not all USB C cables carry sufficient current to charge devices.
⚠ NEVER PLUG YOUR HEADPHONE IN TO CHARGE WHILE EITHER THE CABLE OR CONTACT IS DAMP

Resetting the headphone

This will wipe the headphone's memory of device pairings; the headphone will need to be re-paired to any intended source device

  • Make sure that the headphone is turned OFF (if you tap the power button, the LED shouldn't light up).
  • Hold down the power button, volume up, and volume down buttons simultaneously for ~5 seconds.
  • The LED indicator will rapidly blink red.